Provider Connect Australia (PCA)
2.4.3 - active Australia flag

Provider Connect Australia (PCA) - Local Development build (v2.4.3) built by the FHIR (HL7® FHIR® Standard) Build Tools. See the Directory of published versions

Resource Profile: PcaInformationUseStatement - Detailed Descriptions

Active as of 2024-03-19

Definitions for the pca-information-use-statement resource profile.

Guidance on how to interpret the contents of this table can be found here

0. Contract
Definition

An information use statement for a service.

ShortAn information use statement
2. Contract.id
Must Supporttrue
4. Contract.meta
Must Supporttrue
6. Contract.meta.versionId
Must Supporttrue
8. Contract.meta.lastUpdated
Must Supporttrue
10. Contract.meta.profile
Must Supporttrue
Fixed Valuehttp://pca.digitalhealth.gov.au/fhir/4.0/StructureDefinition/pca-information-use-statement
12. Contract.version
NoteThis is a business versionId, not a resource version id (see discussion)
Control1..?
Must Supporttrue
14. Contract.subject
Definition

The service this information use statement is about.

ShortService this information use statement is about
Control1..1
TypeReference(PCA Partner Service)
Must Supporttrue
Invariantsinv-pca-1: subject shall be a relative reference to a HealthcareService (reference.startsWith('HealthcareService/'))
16. Contract.type
Control1..?
Must Supporttrue
Pattern Value{
  "coding" : [{
    "system" : "http://pca.digitalhealth.gov.au/fhir/4.0/CodeSystem/pca-contract-type",
    "code" : "IUS"
  }]
}
18. Contract.legal
Control1..1
Must Supporttrue
20. Contract.legal.content[x]
TypeAttachment, Reference(Composition, DocumentReference, QuestionnaireResponse)
[x] NoteSee Choice of Data Types for further information about how to use [x]
22. Contract.legal.content[x].contentType
Control1..?
Fixed Valueapplication/xhtml+xml
24. Contract.legal.content[x].data
Definition

The full and complete narrative form of information use statement including policy statements.

ShortInformation use statement narrative
Control1..?
26. Contract.legal.content[x].url
Control0..0

Guidance on how to interpret the contents of this table can be found here

0. Contract
Definition

An information use statement for a service.


Legally enforceable, formally recorded unilateral or bilateral directive i.e., a policy or agreement.

ShortAn information use statementLegal Agreement
Control0..*
Is Modifierfalse
Summaryfalse
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. Contract.id
Definition

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

ShortLogical id of this artifact
Comments

The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

Control0..1
Typeidstring
Is Modifierfalse
Must Supporttrue
Summarytrue
4. Contract.meta
Definition

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

ShortMetadata about the resource
Control0..1
TypeMeta
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
6. Contract.meta.versionId
Definition

The version specific identifier, as it appears in the version portion of the URL. This value changes when the resource is created, updated, or deleted.

ShortVersion specific identifier
Comments

The server assigns this value, and ignores what the client specifies, except in the case that the server is imposing version integrity on updates/deletes.

Control0..1
Typeid
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
8. Contract.meta.lastUpdated
Definition

When the resource last changed - e.g. when the version changed.

ShortWhen the resource version last changed
Comments

This value is always populated except when the resource is first being created. The server / resource manager sets this value; what a client provides is irrelevant. This is equivalent to the HTTP Last-Modified and SHOULD have the same value on a read interaction.

Control0..1
Typeinstant
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. Contract.meta.profile
Definition

A list of profiles (references to StructureDefinition resources) that this resource claims to conform to. The URL is a reference to StructureDefinition.url.

ShortProfiles this resource claims to conform to
Comments

It is up to the server and/or other infrastructure of policy to determine whether/how these claims are verified and/or updated over time. The list of profile URLs is a set.

Control0..*
Typecanonical(StructureDefinition)
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Fixed Valuehttp://pca.digitalhealth.gov.au/fhir/4.0/StructureDefinition/pca-information-use-statement
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. Contract.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
14. Contract.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Summaryfalse
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
16. Contract.version
Definition

An edition identifier used for business purposes to label business significant variants.

ShortBusiness edition
Comments

Note - This is a business versionId, not a resource version id (see discussion http://build.fhir.org/resource.html#versions) Comments - There may be different contract instances that have the same identifier but different versions. The version can be appended to the url in a reference to allow a reference to a particular business version of the plan definition with the format [url]|[version].

NoteThis is a business versionId, not a resource version id (see discussion)
Control10..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

The identifier that is used to identify this version of the contract when it is referenced in a specification, model, design, instance, or contract derivative. This is an arbitrary value managed by the contract author and is not expected to be globally unique. For example, it might be a timestamp (e.g. yyyymmdd) if a managed version is not available. There is also no expectation that versions can be placed in a lexicographical sequence.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
18. Contract.status
Definition

The status of the resource instance.

Shortamended | appended | cancelled | disputed | entered-in-error | executable | executed | negotiable | offered | policy | rejected | renewed | revoked | resolved | terminated
Comments

This element is labeled as a modifier because the status contains codes that mark the contract as not currently valid or active.

Control0..1
BindingThe codes SHALL be taken from ContractResourceStatusCodeshttp://hl7.org/fhir/ValueSet/contract-status|4.0.1
(required to http://hl7.org/fhir/ValueSet/contract-status|4.0.1)

A code specifying the state of the resource instance.

Typecode
Is Modifiertrue because This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

This is the Contract Business Workflow Status.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
20. Contract.subject
Definition

The service this information use statement is about.


The target entity impacted by or of interest to parties to the agreement.

ShortService this information use statement is aboutContract Target Entity
Comments

The Contract.subject is an entity that has some role with respect to the Contract.topic and Contract.topic.term, which is of focal interest to the parties to the contract and likely impacted in a significant way by the Contract.action/Contract.action.reason and the Contract.term.action/Contract.action.reason. In many cases, the Contract.subject is a Contract.signer if the subject is an adult; has a legal interest in the contract; and incompetent to participate in the contract agreement.

Control10..1*
TypeReference(PCA Partner Service, Resource)
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

The Contract.subject is an entity that has some role with respect to the Contract.topic and Contract.topic.term, which is of focal interest to the parties to the contract and likely impacted in a significant way by the Contract.action/Contract.action.reason and the Contract.term.action/Contract.action.reason. In many cases, the Contract.subject is a Contract.signer if the subject is an adult; has a legal interest in the contract; and incompetent to participate in the contract agreement.

Alternate NamesPatient
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
inv-pca-1: subject shall be a relative reference to a HealthcareService (reference.startsWith('HealthcareService/'))
22. Contract.type
Definition

A high-level category for the legal instrument, whether constructed as a Contract definition, derivative, or instance in any legal state. Provides additional information about its content within the context of the Contract's scope to distinguish the kinds of systems that would be interested in the contract.

ShortLegal instrument category
Control10..1
BindingFor example codes, see ContractTypeCodeshttp://hl7.org/fhir/ValueSet/contract-type
(example to http://hl7.org/fhir/ValueSet/contract-type)

List of overall contract codes.

TypeCodeableConcept
Is Modifierfalse
Must Supporttrue
Summarytrue
Pattern Value{
  "coding" : [{
    "system" : "http://pca.digitalhealth.gov.au/fhir/4.0/CodeSystem/pca-contract-type",
    "code" : "IUS"
  }]
}
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
24. Contract.legal
Definition

List of Legal expressions or representations of this Contract.

ShortContract Legal Language
Control10..1*
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
26. Contract.legal.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
28. Contract.legal.content[x]
Definition

Contract legal text in human renderable form.

ShortContract Legal Text
Control1..1
TypeAttachment, Reference(Composition, DocumentReference, QuestionnaireResponse)
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
30. Contract.legal.content[x].contentType
Definition

Identifies the type of the data in the attachment and allows a method to be chosen to interpret or render the data. Includes mime type parameters such as charset where appropriate.

ShortMime type of the content, with charset etc.
Control10..1
BindingThe codes SHALL be taken from Mime Typeshttp://hl7.org/fhir/ValueSet/mimetypes|4.0.1
(required to http://hl7.org/fhir/ValueSet/mimetypes|4.0.1)

The mime type of an attachment. Any valid mime type is allowed.

Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Processors of the data need to be able to know how to interpret the data.

Fixed Valueapplication/xhtml+xml
Example<br/><b>General</b>:text/plain; charset=UTF-8, image/png
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
32. Contract.legal.content[x].data
Definition

The full and complete narrative form of information use statement including policy statements.


The actual data of the attachment - a sequence of bytes, base64 encoded.

ShortInformation use statement narrativeData inline, base64ed
Comments

The base64-encoded data SHALL be expressed in the same character set as the base resource XML or JSON.

Control10..1
Typebase64Binary
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Requirements

The data needs to able to be transmitted inline.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
34. Contract.legal.content[x].url
Definition

A location where the data can be accessed.

ShortUri where the data can be found
Comments

If both data and url are provided, the url SHALL point to the same content as the data contains. Urls may be relative references or may reference transient locations such as a wrapping envelope using cid: though this has ramifications for using signatures. Relative URLs are interpreted relative to the service url, like a resource reference, rather than relative to the resource itself. If a URL is provided, it SHALL resolve to actual data.

Control0..01
Typeurl
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

The data needs to be transmitted by reference.

Example<br/><b>General</b>:http://www.acme.com/logo-small.png
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

Guidance on how to interpret the contents of this table can be found here

0. Contract
Definition

An information use statement for a service.

ShortAn information use statement
Control0..*
Is Modifierfalse
Summaryfalse
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. Contract.id
Definition

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

ShortLogical id of this artifact
Comments

The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

Control0..1
Typeid
Is Modifierfalse
Must Supporttrue
Summarytrue
4. Contract.meta
Definition

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

ShortMetadata about the resource
Control0..1
TypeMeta
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
6. Contract.meta.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
8. Contract.meta.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Contract.meta.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 10. Contract.meta.versionId
    Definition

    The version specific identifier, as it appears in the version portion of the URL. This value changes when the resource is created, updated, or deleted.

    ShortVersion specific identifier
    Comments

    The server assigns this value, and ignores what the client specifies, except in the case that the server is imposing version integrity on updates/deletes.

    Control0..1
    Typeid
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    12. Contract.meta.lastUpdated
    Definition

    When the resource last changed - e.g. when the version changed.

    ShortWhen the resource version last changed
    Comments

    This value is always populated except when the resource is first being created. The server / resource manager sets this value; what a client provides is irrelevant. This is equivalent to the HTTP Last-Modified and SHOULD have the same value on a read interaction.

    Control0..1
    Typeinstant
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    14. Contract.meta.source
    Definition

    A uri that identifies the source system of the resource. This provides a minimal amount of Provenance information that can be used to track or differentiate the source of information in the resource. The source may identify another FHIR server, document, message, database, etc.

    ShortIdentifies where the resource comes from
    Comments

    In the provenance resource, this corresponds to Provenance.entity.what[x]. The exact use of the source (and the implied Provenance.entity.role) is left to implementer discretion. Only one nominated source is allowed; for additional provenance details, a full Provenance resource should be used.

    This element can be used to indicate where the current master source of a resource that has a canonical URL if the resource is no longer hosted at the canonical URL.

    Control0..1
    Typeuri
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    16. Contract.meta.profile
    Definition

    A list of profiles (references to StructureDefinition resources) that this resource claims to conform to. The URL is a reference to StructureDefinition.url.

    ShortProfiles this resource claims to conform to
    Comments

    It is up to the server and/or other infrastructure of policy to determine whether/how these claims are verified and/or updated over time. The list of profile URLs is a set.

    Control0..*
    Typecanonical(StructureDefinition)
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Fixed Valuehttp://pca.digitalhealth.gov.au/fhir/4.0/StructureDefinition/pca-information-use-statement
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    18. Contract.meta.security
    Definition

    Security labels applied to this resource. These tags connect specific resources to the overall security policy and infrastructure.

    ShortSecurity Labels applied to this resource
    Comments

    The security labels can be updated without changing the stated version of the resource. The list of security labels is a set. Uniqueness is based the system/code, and version and display are ignored.

    Control0..*
    BindingUnless not suitable, these codes SHALL be taken from All Security Labels
    (extensible to http://hl7.org/fhir/ValueSet/security-labels)

    Security Labels from the Healthcare Privacy and Security Classification System.

    TypeCoding
    Is Modifierfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    20. Contract.meta.tag
    Definition

    Tags applied to this resource. Tags are intended to be used to identify and relate resources to process and workflow, and applications are not required to consider the tags when interpreting the meaning of a resource.

    ShortTags applied to this resource
    Comments

    The tags can be updated without changing the stated version of the resource. The list of tags is a set. Uniqueness is based the system/code, and version and display are ignored.

    Control0..*
    BindingFor example codes, see CommonTags
    (example to http://hl7.org/fhir/ValueSet/common-tags)

    Codes that represent various types of tags, commonly workflow-related; e.g. "Needs review by Dr. Jones".

    TypeCoding
    Is Modifierfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    22. Contract.implicitRules
    Definition

    A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

    ShortA set of rules under which this content was created
    Comments

    Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

    Control0..1
    Typeuri
    Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    24. Contract.language
    Definition

    The base language in which the resource is written.

    ShortLanguage of the resource content
    Comments

    Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

    Control0..1
    BindingThe codes SHOULD be taken from CommonLanguages
    (preferred to http://hl7.org/fhir/ValueSet/languages)

    A human language.

    Additional BindingsPurpose
    AllLanguagesMax Binding
    Typecode
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    26. Contract.text
    Definition

    A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

    ShortText summary of the resource, for human interpretation
    Comments

    Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

    Control0..1
    TypeNarrative
    Is Modifierfalse
    Summaryfalse
    Alternate Namesnarrative, html, xhtml, display
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    28. Contract.contained
    Definition

    These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

    ShortContained, inline Resources
    Comments

    This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

    Control0..*
    TypeResource
    Is Modifierfalse
    Summaryfalse
    Alternate Namesinline resources, anonymous resources, contained resources
    30. Contract.extension
    Definition

    May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

    ShortAdditional content defined by implementations
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifierfalse
    Summaryfalse
    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    32. Contract.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
    Summaryfalse
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    34. Contract.identifier
    Definition

    Unique identifier for this Contract or a derivative that references a Source Contract.

    ShortContract number
    NoteThis is a business identifier, not a resource identifier (see discussion)
    Control0..*
    TypeIdentifier
    Is Modifierfalse
    Summarytrue
    Requirements

    This is the business identifier of the contract content conveyed. It may be a derivative of the legally binding contract, in which case, the identifier of the basal contract is contained in the Contract.binding referenced Contract.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    36. Contract.url
    Definition

    Canonical identifier for this contract, represented as a URI (globally unique).

    ShortBasal definition
    Comments

    Used in a domain that uses a supplied contract repository.

    Control0..1
    Typeuri
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summaryfalse
    Requirements

    An absolute URI that is used to identify this contract when it is referenced in a specification, model, design, instance or a contract derivative; also called its canonical identifier. This SHOULD be globally unique and SHOULD be a literal address at which this plan definition is (or will be) published.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    38. Contract.version
    Definition

    An edition identifier used for business purposes to label business significant variants.

    ShortBusiness edition
    Comments

    Note - This is a business versionId, not a resource version id (see discussion http://build.fhir.org/resource.html#versions) Comments - There may be different contract instances that have the same identifier but different versions. The version can be appended to the url in a reference to allow a reference to a particular business version of the plan definition with the format [url]|[version].

    NoteThis is a business versionId, not a resource version id (see discussion)
    Control1..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Requirements

    The identifier that is used to identify this version of the contract when it is referenced in a specification, model, design, instance, or contract derivative. This is an arbitrary value managed by the contract author and is not expected to be globally unique. For example, it might be a timestamp (e.g. yyyymmdd) if a managed version is not available. There is also no expectation that versions can be placed in a lexicographical sequence.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    40. Contract.status
    Definition

    The status of the resource instance.

    Shortamended | appended | cancelled | disputed | entered-in-error | executable | executed | negotiable | offered | policy | rejected | renewed | revoked | resolved | terminated
    Comments

    This element is labeled as a modifier because the status contains codes that mark the contract as not currently valid or active.

    Control0..1
    BindingThe codes SHALL be taken from ContractResourceStatusCodes
    (required to http://hl7.org/fhir/ValueSet/contract-status|4.0.1)

    A code specifying the state of the resource instance.

    Typecode
    Is Modifiertrue because This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Requirements

    This is the Contract Business Workflow Status.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    42. Contract.legalState
    Definition

    Legal states of the formation of a legal instrument, which is a formally executed written document that can be formally attributed to its author, records and formally expresses a legally enforceable act, process, or contractual duty, obligation, or right, and therefore evidences that act, process, or agreement.

    ShortNegotiation status
    Control0..1
    BindingUnless not suitable, these codes SHALL be taken from ContractResourceLegalStateCodes
    (extensible to http://hl7.org/fhir/ValueSet/contract-legalstate)

    Detailed codes for the legal state of a contract.

    TypeCodeableConcept
    Is Modifierfalse
    Summaryfalse
    Requirements

    The legal state of a contract follows a prescribed flow as defined by the legal community and these state may be indepenedent of the workflow state.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    44. Contract.instantiatesCanonical
    Definition

    The URL pointing to a FHIR-defined Contract Definition that is adhered to in whole or part by this Contract.

    ShortSource Contract Definition
    Control0..1
    TypeReference(Contract)
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    46. Contract.instantiatesUri
    Definition

    The URL pointing to an externally maintained definition that is adhered to in whole or in part by this Contract.

    ShortExternal Contract Definition
    Control0..1
    Typeuri
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    48. Contract.contentDerivative
    Definition

    The minimal content derived from the basal information source at a specific stage in its lifecycle.

    ShortContent derived from the basal information
    Control0..1
    BindingFor example codes, see ContractContentDerivationCodes
    (example to http://hl7.org/fhir/ValueSet/contract-content-derivative)

    This is an example set of Content Derivative type codes, which represent the minimal content derived from the basal information source.

    TypeCodeableConcept
    Is Modifierfalse
    Summaryfalse
    Requirements

    In the context of a contract, the information source of the content derivative shall be the information referenced by the contract.binding. The Contract Resource may function simply as the computable representation of the executed contract, which may be the attached to the Contract Resource as the “binding” or as the “friendly” electronic form. For example, a Contract Resource may be automatically populated with the values expressed in a related QuestionnaireResponse. However, the Contract Resource may be considered the legally binding contract if it is the only “executed” form of this contract, and includes the signatures as *The Contract Resource may function as the computable representation of an application or offer in a pre-executed Contract if the grantor has not entered any values. In this case, it is populated with values in a “legal” form of the application or offer or by the values in an associated Questionnaire. If the grantor has filled in the legal form or the associated Questionnaire Response, then these values are used to populate a pre-executed Contract Resource. If the Contract.topic is considered an application or offer, then the policy is often required to be attached as the “legal” basis for the application to ensure “informed consent” to the contract, and that any discrepancy between the application and the policy are interpreted against the policy. Implementers should check organizational and jurisdictional policies to determine the relationship among multiple representations of a contract pre- and post-execution.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    50. Contract.issued
    Definition

    When this Contract was issued.

    ShortWhen this Contract was issued
    Control0..1
    TypedateTime
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Requirements

    The Contract issuance dateTime often precedes the Contract effective dateTime.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    52. Contract.applies
    Definition

    Relevant time or time-period when this Contract is applicable.

    ShortEffective time
    Control0..1
    TypePeriod
    Is Modifierfalse
    Summarytrue
    Requirements

    The dateTime upon which the Contract is binding.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    54. Contract.expirationType
    Definition

    Event resulting in discontinuation or termination of this Contract instance by one or more parties to the contract.

    ShortContract cessation cause
    Control0..1
    BindingFor example codes, see ContractResourceExpirationTypeCodes
    (example to http://hl7.org/fhir/ValueSet/contract-expiration-type)

    Codes for the Cessation of Contracts.

    TypeCodeableConcept
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    56. Contract.subject
    Definition

    The service this information use statement is about.

    ShortService this information use statement is about
    Comments

    The Contract.subject is an entity that has some role with respect to the Contract.topic and Contract.topic.term, which is of focal interest to the parties to the contract and likely impacted in a significant way by the Contract.action/Contract.action.reason and the Contract.term.action/Contract.action.reason. In many cases, the Contract.subject is a Contract.signer if the subject is an adult; has a legal interest in the contract; and incompetent to participate in the contract agreement.

    Control1..1
    TypeReference(PCA Partner Service)
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Requirements

    The Contract.subject is an entity that has some role with respect to the Contract.topic and Contract.topic.term, which is of focal interest to the parties to the contract and likely impacted in a significant way by the Contract.action/Contract.action.reason and the Contract.term.action/Contract.action.reason. In many cases, the Contract.subject is a Contract.signer if the subject is an adult; has a legal interest in the contract; and incompetent to participate in the contract agreement.

    Alternate NamesPatient
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    inv-pca-1: subject shall be a relative reference to a HealthcareService (reference.startsWith('HealthcareService/'))
    58. Contract.authority
    Definition

    A formally or informally recognized grouping of people, principals, organizations, or jurisdictions formed for the purpose of achieving some form of collective action such as the promulgation, administration and enforcement of contracts and policies.

    ShortAuthority under which this Contract has standing
    Control0..*
    TypeReference(Organization)
    Is Modifierfalse
    Summaryfalse
    Requirements

    The governance framework responsible for ensuring compliance with or enforcement of the contract or policy.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    60. Contract.domain
    Definition

    Recognized governance framework or system operating with a circumscribed scope in accordance with specified principles, policies, processes or procedures for managing rights, actions, or behaviors of parties or principals relative to resources.

    ShortA sphere of control governed by an authoritative jurisdiction, organization, or person
    Control0..*
    TypeReference(Location)
    Is Modifierfalse
    Summaryfalse
    Requirements

    The entities bound by governance to comply with the enforcement of contracts or policies by a recognized authority.

    Alternate Namesscope of governance jurisdiction
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    62. Contract.site
    Definition

    Sites in which the contract is complied with, exercised, or in force.

    ShortSpecific Location
    Control0..*
    TypeReference(Location)
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    64. Contract.name
    Definition

    A natural language name identifying this Contract definition, derivative, or instance in any legal state. Provides additional information about its content. This name should be usable as an identifier for the module by machine processing applications such as code generation.

    ShortComputer friendly designation
    Comments

    The name is not expected to be globally unique. The name should be a simple alphanumeric type name to ensure that it is machine-processing friendly.

    Control0..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Requirements

    Support human navigation and code generation.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    66. Contract.title
    Definition

    A short, descriptive, user-friendly title for this Contract definition, derivative, or instance in any legal state.t giving additional information about its content.

    ShortHuman Friendly name
    Control0..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    68. Contract.subtitle
    Definition

    An explanatory or alternate user-friendly title for this Contract definition, derivative, or instance in any legal state.t giving additional information about its content.

    ShortSubordinate Friendly name
    Control0..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    70. Contract.alias
    Definition

    Alternative representation of the title for this Contract definition, derivative, or instance in any legal state., e.g., a domain specific contract number related to legislation.

    ShortAcronym or short name
    Control0..*
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    72. Contract.author
    Definition

    The individual or organization that authored the Contract definition, derivative, or instance in any legal state.

    ShortSource of Contract
    Control0..1
    TypeReference(Patient, Practitioner, PractitionerRole, Organization)
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    74. Contract.scope
    Definition

    A selector of legal concerns for this Contract definition, derivative, or instance in any legal state.

    ShortRange of Legal Concerns
    Control0..1
    BindingFor example codes, see ContractResourceScopeCodes
    (example to http://hl7.org/fhir/ValueSet/contract-scope)

    Codes for the range of legal concerns.

    TypeCodeableConcept
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    76. Contract.topic[x]
    Definition

    Narrows the range of legal concerns to focus on the achievement of specific contractual objectives.

    ShortFocus of contract interest
    Control0..1
    TypeChoice of: CodeableConcept, Reference(Resource)
    [x] NoteSee Choice of Data Types for further information about how to use [x]
    Is Modifierfalse
    Summaryfalse
    Requirements

    Requirement: May be used to focus the topic of a Contract definition, derivative, or instance in any legal state. Comment: Contractual areas of concern are very broad. This element supports narrowing the area of concern to more specific term topics within this Contract. Given the wide range of contract topics, implementers need to be cognizant of the business use case for which they are designing a FHIR Contract, and narrowly specify the topic being represented with respect to the Contract.type and any specializing Contract.subtype. The same topic, e.g., an asset such as a good or service, such as a real property, medical supply, insurance, information, a procedure or employment, or a manner of conduct, such adherence to a privacy, trust, or security policy, may be the topic of multiple types of contracts. One way to determine the Contract.topic is to answer the question: “What is the overall objective of this legal instrument. The Contract.topic is described with more detail by the terms of the Contract.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    78. Contract.type
    Definition

    A high-level category for the legal instrument, whether constructed as a Contract definition, derivative, or instance in any legal state. Provides additional information about its content within the context of the Contract's scope to distinguish the kinds of systems that would be interested in the contract.

    ShortLegal instrument category
    Control1..1
    BindingFor example codes, see ContractTypeCodes
    (example to http://hl7.org/fhir/ValueSet/contract-type)

    List of overall contract codes.

    TypeCodeableConcept
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Pattern Value{
      "coding" : [{
        "system" : "http://pca.digitalhealth.gov.au/fhir/4.0/CodeSystem/pca-contract-type",
        "code" : "IUS"
      }]
    }
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    80. Contract.subType
    Definition

    Sub-category for the Contract that distinguishes the kinds of systems that would be interested in the Contract within the context of the Contract's scope.

    ShortSubtype within the context of type
    Control0..*
    BindingFor example codes, see ContractSubtypeCodes
    (example to http://hl7.org/fhir/ValueSet/contract-subtype)

    Detailed codes within the above.

    TypeCodeableConcept
    Is Modifierfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    82. Contract.contentDefinition
    Definition

    Precusory content developed with a focus and intent of supporting the formation a Contract instance, which may be associated with and transformable into a Contract.

    ShortContract precursor content
    Control0..1
    TypeBackboneElement
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    84. Contract.contentDefinition.id
    Definition

    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

    ShortUnique id for inter-element referencing
    Control0..1
    Typestring
    Is Modifierfalse
    XML FormatIn the XML format, this property is represented as an attribute.
    Summaryfalse
    86. Contract.contentDefinition.extension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

    ShortAdditional content defined by implementations
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifierfalse
    Summaryfalse
    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    88. Contract.contentDefinition.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    90. Contract.contentDefinition.type
    Definition

    Precusory content structure and use, i.e., a boilerplate, template, application for a contract such as an insurance policy or benefits under a program, e.g., workers compensation.

    ShortContent structure and use
    Control1..1
    BindingFor example codes, see ContractResourceDefinitionTypeCodes
    (example to http://hl7.org/fhir/ValueSet/contract-definition-type)

    Detailed codes for the definition of contracts.

    TypeCodeableConcept
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    92. Contract.contentDefinition.subType
    Definition

    Detailed Precusory content type.

    ShortDetailed Content Type Definition
    Control0..1
    BindingFor example codes, see ContractResourceDefinitionSubtypeCodes
    (example to http://hl7.org/fhir/ValueSet/contract-definition-subtype)

    Detailed codes for the additional definition of contracts.

    TypeCodeableConcept
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    94. Contract.contentDefinition.publisher
    Definition

    The individual or organization that published the Contract precursor content.

    ShortPublisher Entity
    Control0..1
    TypeReference(Practitioner, PractitionerRole, Organization)
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    96. Contract.contentDefinition.publicationDate
    Definition

    The date (and optionally time) when the contract was published. The date must change when the business version changes and it must change if the status code changes. In addition, it should change when the substantive content of the contract changes.

    ShortWhen published
    Control0..1
    TypedateTime
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    98. Contract.contentDefinition.publicationStatus
    Definition

    amended | appended | cancelled | disputed | entered-in-error | executable | executed | negotiable | offered | policy | rejected | renewed | revoked | resolved | terminated.

    Shortamended | appended | cancelled | disputed | entered-in-error | executable | executed | negotiable | offered | policy | rejected | renewed | revoked | resolved | terminated
    Control1..1
    BindingThe codes SHALL be taken from ContractResourcePublicationStatusCodes
    (required to http://hl7.org/fhir/ValueSet/contract-publicationstatus|4.0.1)

    Status of the publication of contract content.

    Typecode
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    100. Contract.contentDefinition.copyright
    Definition

    A copyright statement relating to Contract precursor content. Copyright statements are generally legal restrictions on the use and publishing of the Contract precursor content.

    ShortPublication Ownership
    Control0..1
    Typemarkdown
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    102. Contract.term
    Definition

    One or more Contract Provisions, which may be related and conveyed as a group, and may contain nested groups.

    ShortContract Term List
    Control0..*
    TypeBackboneElement
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    104. Contract.term.id
    Definition

    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

    ShortUnique id for inter-element referencing
    Control0..1
    Typestring
    Is Modifierfalse
    XML FormatIn the XML format, this property is represented as an attribute.
    Summaryfalse
    106. Contract.term.extension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

    ShortAdditional content defined by implementations
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifierfalse
    Summaryfalse
    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    108. Contract.term.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    110. Contract.term.identifier
    Definition

    Unique identifier for this particular Contract Provision.

    ShortContract Term Number
    NoteThis is a business identifier, not a resource identifier (see discussion)
    Control0..1
    TypeIdentifier
    Is Modifierfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    112. Contract.term.issued
    Definition

    When this Contract Provision was issued.

    ShortContract Term Issue Date Time
    Control0..1
    TypedateTime
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    114. Contract.term.applies
    Definition

    Relevant time or time-period when this Contract Provision is applicable.

    ShortContract Term Effective Time
    Control0..1
    TypePeriod
    Is Modifierfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    116. Contract.term.topic[x]
    Definition

    The entity that the term applies to.

    ShortTerm Concern
    Control0..1
    TypeChoice of: CodeableConcept, Reference(Resource)
    [x] NoteSee Choice of Data Types for further information about how to use [x]
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    118. Contract.term.type
    Definition

    A legal clause or condition contained within a contract that requires one or both parties to perform a particular requirement by some specified time or prevents one or both parties from performing a particular requirement by some specified time.

    ShortContract Term Type or Form
    Control0..1
    BindingFor example codes, see ContractTermTypeCodes
    (example to http://hl7.org/fhir/ValueSet/contract-term-type)

    Detailed codes for the types of contract provisions.

    TypeCodeableConcept
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    120. Contract.term.subType
    Definition

    A specialized legal clause or condition based on overarching contract type.

    ShortContract Term Type specific classification
    Control0..1
    BindingFor example codes, see ContractTermSubtypeCodes
    (example to http://hl7.org/fhir/ValueSet/contract-term-subtype)

    Detailed codes for the subtypes of contract provisions.

    TypeCodeableConcept
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    122. Contract.term.text
    Definition

    Statement of a provision in a policy or a contract.

    ShortTerm Statement
    Control0..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    124. Contract.term.securityLabel
    Definition

    Security labels that protect the handling of information about the term and its elements, which may be specifically identified..

    ShortProtection for the Term
    Control0..*
    TypeBackboneElement
    Is Modifierfalse
    Summaryfalse
    Requirements

    Requirement - Within a Contract, a security label may apply to the one to many nested group of terms or to a term, whether inside a group or a singleton. This security label protects the term and its contained provision elements. The security label on the entire set of term provision elements may be different from the security labels on a contained offer, asset, valuedItem, or data such as sensitive information, and must be the high water mark of all security labels within the term. Rationale is that a labelled term, which may be disaggregated from the Contract, and must persist the label on the term and on contained elements within other contexts. Requirement - If more than one policy dictates a level of confidentiality of the term, then each applicable policy may be represented by a security label specific to its requirements. Comment - A Security Label is comprised of 1..1 confidentiality code and 0..* other security label codes (aka "privacy tags". A Security Label is metadata assigned (aka "tagged") to Resources and Resource elements, which specify the confidentiality and sensitivity of the Resource or element and their related attributes, the purposes for which tagged items may be collected, access, used or disclosed, any limitation on the type of entities authorized to engage in permitted purposes, and handling instructions that obligate or prohibit certain actions on the tagged items.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    126. Contract.term.securityLabel.id
    Definition

    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

    ShortUnique id for inter-element referencing
    Control0..1
    Typestring
    Is Modifierfalse
    XML FormatIn the XML format, this property is represented as an attribute.
    Summaryfalse
    128. Contract.term.securityLabel.extension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

    ShortAdditional content defined by implementations
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifierfalse
    Summaryfalse
    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    130. Contract.term.securityLabel.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    132. Contract.term.securityLabel.number
    Definition

    Number used to link this term or term element to the applicable Security Label.

    ShortLink to Security Labels
    Control0..*
    TypeunsignedInt
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    134. Contract.term.securityLabel.classification
    Definition

    Security label privacy tag that species the level of confidentiality protection required for this term and/or term elements.

    ShortConfidentiality Protection
    Control1..1
    BindingFor example codes, see ContractResourceScopeCodes
    (example to http://hl7.org/fhir/ValueSet/contract-security-classification)

    Codes for confidentiality protection.

    TypeCoding
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    136. Contract.term.securityLabel.category
    Definition

    Security label privacy tag that species the applicable privacy and security policies governing this term and/or term elements.

    ShortApplicable Policy
    Control0..*
    BindingFor example codes, see ContractResourceScopeCodes
    (example to http://hl7.org/fhir/ValueSet/contract-security-category)

    Codes for policy category.

    TypeCoding
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    138. Contract.term.securityLabel.control
    Definition

    Security label privacy tag that species the manner in which term and/or term elements are to be protected.

    ShortHandling Instructions
    Control0..*
    BindingFor example codes, see ContractResourceSecurityControlCodes
    (example to http://hl7.org/fhir/ValueSet/contract-security-control)

    Codes for handling instructions.

    TypeCoding
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    140. Contract.term.offer
    Definition

    The matter of concern in the context of this provision of the agrement.

    ShortContext of the Contract term
    Control1..1
    TypeBackboneElement
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    142. Contract.term.offer.id
    Definition

    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

    ShortUnique id for inter-element referencing
    Control0..1
    Typestring
    Is Modifierfalse
    XML FormatIn the XML format, this property is represented as an attribute.
    Summaryfalse
    144. Contract.term.offer.extension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

    ShortAdditional content defined by implementations
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifierfalse
    Summaryfalse
    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    146. Contract.term.offer.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    148. Contract.term.offer.identifier
    Definition

    Unique identifier for this particular Contract Provision.

    ShortOffer business ID
    NoteThis is a business identifier, not a resource identifier (see discussion)
    Control0..*
    TypeIdentifier
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    150. Contract.term.offer.party
    Definition

    Offer Recipient.

    ShortOffer Recipient
    Control0..*
    TypeBackboneElement
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    152. Contract.term.offer.party.id
    Definition

    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

    ShortUnique id for inter-element referencing
    Control0..1
    Typestring
    Is Modifierfalse
    XML FormatIn the XML format, this property is represented as an attribute.
    Summaryfalse
    154. Contract.term.offer.party.extension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

    ShortAdditional content defined by implementations
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifierfalse
    Summaryfalse
    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    156. Contract.term.offer.party.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    158. Contract.term.offer.party.reference
    Definition

    Participant in the offer.

    ShortReferenced entity
    Control1..*
    TypeReference(Patient, RelatedPerson, Practitioner, PractitionerRole, Device, Group, Organization)
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    160. Contract.term.offer.party.role
    Definition

    How the party participates in the offer.

    ShortParticipant engagement type
    Control1..1
    BindingFor example codes, see ContractResourcePartyRoleCodes
    (example to http://hl7.org/fhir/ValueSet/contract-party-role)

    Codes for offer participant roles.

    TypeCodeableConcept
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    162. Contract.term.offer.topic
    Definition

    The owner of an asset has the residual control rights over the asset: the right to decide all usages of the asset in any way not inconsistent with a prior contract, custom, or law (Hart, 1995, p. 30).

    ShortNegotiable offer asset
    Comments

    The Contract.topic may be an application for or offer of a policy or service (e.g., uri to a consent directive form or a health insurance policy), which becomes the Contract once accepted by both the grantor and grantee. The Contract Resource may function simply as the computable representation of the executed contract, which may be the attached to the Contract Resource as the “binding” or as the “friendly” electronic form. For example, a Contract Resource may be automatically populated with the values expressed in a related QuestionnaireResponse. However, the Contract Resource may be considered the legally binding contract if it is the only “executed” form of this contract, and includes the signatures as *The Contract Resource may function as the computable representation of an application or offer in a pre-executed Contract if the grantor has not entered any values. In this case, it is populated with values in a “legal” form of the application or offer or by the values in an associated Questionnaire. If the grantor has filled in the legal form or the associated Questionnaire Response, then these values are used to populate a pre-executed Contract Resource. If the Contract.topic is considered an application or offer, then the policy is often required to be attached as the “legal” basis for the application to ensure “informed consent” to the contract, and that any discrepancy between the application and the policy are interpreted against the policy. Implementers should check organizational and jurisdictional policies to determine the relationship among multiple representations of a contract pre- and post-execution.

    Control0..1
    TypeReference(Resource)
    Is Modifierfalse
    Summarytrue
    Requirements

    In the context of a contract, the topic is the matter under consideration in regards to which specific rights, privileges, obligations, restrictions, and prohibitions are binding on any grantor and grantee parties upon the execution of the contract. Given the wide range of contract topics, implementers need to be cognizant of the business use case for which they are designing a FHIR Contract, and narrowly specify the topic being represented with respect to the Contract.type and any specializing Contract.subtype. The same topic, e.g., an asset such as a good or service, such as a real property, medical supply, insurance, information, a procedure or employment, or a manner of conduct, such adherence to a privacy, trust, or security policy, may be the topic of multiple types of contracts. One way to determine the Contract.topic is to answer the question: “What is the object of negotiation?” Answer: The Contract.topic, which may be described with more detail in the [0..*]Contract.valuedItem @ [0..1] Contract.valuedItem.entity[x] Definition: Specific type of Contract Valued Item that may be priced. CodeableConcept|Reference(Any) Contract.topic is “the what” that a grantor is exchanging with a grantee in return for some benefit. Contract.topic is “the what” to which any Contract.action is being applied for any stipulated Contract.action.reason. AContract.topic is “the what” governed by the execution of the contract to which any party’s rights, privileges, obligations, restrictions, and prohibitions apply.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    164. Contract.term.offer.type
    Definition

    Type of Contract Provision such as specific requirements, purposes for actions, obligations, prohibitions, e.g. life time maximum benefit.

    ShortContract Offer Type or Form
    Control0..1
    BindingFor example codes, see ContractTermTypeCodes
    (example to http://hl7.org/fhir/ValueSet/contract-term-type)

    Detailed codes for the types of contract provisions.

    TypeCodeableConcept
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    166. Contract.term.offer.decision
    Definition

    Type of choice made by accepting party with respect to an offer made by an offeror/ grantee.

    ShortAccepting party choice
    Control0..1
    BindingUnless not suitable, these codes SHALL be taken from ActConsentDirective
    (extensible to http://terminology.hl7.org/ValueSet/v3-ActConsentDirective)

    The type of decision made by a grantor with respect to an offer made by a grantee.

    TypeCodeableConcept
    Is Modifierfalse
    Summaryfalse
    Requirements

    In some policy or contract contexts, the "offer" is made by an offeror wishing to be the "grantee" of the offer topic by the grantor. From this perspective, the grantor is the "offeree".

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    168. Contract.term.offer.decisionMode
    Definition

    How the decision about a Contract was conveyed.

    ShortHow decision is conveyed
    Control0..*
    BindingFor example codes, see ContractResourceDecisionModeCodes
    (example to http://hl7.org/fhir/ValueSet/contract-decision-mode)

    Codes for conveying a decision.

    TypeCodeableConcept
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    170. Contract.term.offer.answer
    Definition

    Response to offer text.

    ShortResponse to offer text
    Control0..*
    TypeBackboneElement
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    172. Contract.term.offer.answer.id
    Definition

    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

    ShortUnique id for inter-element referencing
    Control0..1
    Typestring
    Is Modifierfalse
    XML FormatIn the XML format, this property is represented as an attribute.
    Summaryfalse
    174. Contract.term.offer.answer.extension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

    ShortAdditional content defined by implementations
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifierfalse
    Summaryfalse
    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    176. Contract.term.offer.answer.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    178. Contract.term.offer.answer.value[x]
    Definition

    Response to an offer clause or question text, which enables selection of values to be agreed to, e.g., the period of participation, the date of occupancy of a rental, warrently duration, or whether biospecimen may be used for further research.

    ShortThe actual answer response
    Control1..1
    TypeChoice of: boolean, decimal, integer, date, dateTime, time, string, uri, Attachment, Coding, Quantity, Reference(Resource)
    [x] NoteSee Choice of Data Types for further information about how to use [x]
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    180. Contract.term.offer.text
    Definition

    Human readable form of this Contract Offer.

    ShortHuman readable offer text
    Control0..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    182. Contract.term.offer.linkId
    Definition

    The id of the clause or question text of the offer in the referenced questionnaire/response.

    ShortPointer to text
    Control0..*
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    184. Contract.term.offer.securityLabelNumber
    Definition

    Security labels that protects the offer.

    ShortOffer restriction numbers
    Control0..*
    TypeunsignedInt
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    186. Contract.term.asset
    Definition

    Contract Term Asset List.

    ShortContract Term Asset List
    Control0..*
    TypeBackboneElement
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    188. Contract.term.asset.id
    Definition

    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

    ShortUnique id for inter-element referencing
    Control0..1
    Typestring
    Is Modifierfalse
    XML FormatIn the XML format, this property is represented as an attribute.
    Summaryfalse
    190. Contract.term.asset.extension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

    ShortAdditional content defined by implementations
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifierfalse
    Summaryfalse
    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    192. Contract.term.asset.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    194. Contract.term.asset.scope
    Definition

    Differentiates the kind of the asset .

    ShortRange of asset
    Control0..1
    BindingFor example codes, see ContractResourceAssetScopeCodes
    (example to http://hl7.org/fhir/ValueSet/contract-assetscope)

    Codes for scoping an asset.

    TypeCodeableConcept
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    196. Contract.term.asset.type
    Definition

    Target entity type about which the term may be concerned.

    ShortAsset category
    Control0..*
    BindingFor example codes, see ContractResourceAssetTypeCodes
    (example to http://hl7.org/fhir/ValueSet/contract-assettype)

    Condes for the type of an asset.

    TypeCodeableConcept
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    198. Contract.term.asset.typeReference
    Definition

    Associated entities.

    ShortAssociated entities
    Control0..*
    TypeReference(Resource)
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    200. Contract.term.asset.subtype
    Definition

    May be a subtype or part of an offered asset.

    ShortAsset sub-category
    Control0..*
    BindingFor example codes, see ContractResourceAssetSub-TypeCodes
    (example to http://hl7.org/fhir/ValueSet/contract-assetsubtype)

    Condes for the sub-type of an asset.

    TypeCodeableConcept
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    202. Contract.term.asset.relationship
    Definition

    Specifies the applicability of the term to an asset resource instance, and instances it refers to orinstances that refer to it, and/or are owned by the offeree.

    ShortKinship of the asset
    Control0..1
    BindingUnless not suitable, these codes SHALL be taken from ConsentContentClass
    (extensible to http://hl7.org/fhir/ValueSet/consent-content-class)

    The class (type) of information a consent rule covers.

    TypeCoding
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    204. Contract.term.asset.context
    Definition

    Circumstance of the asset.

    ShortCircumstance of the asset
    Control0..*
    TypeBackboneElement
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    206. Contract.term.asset.context.id
    Definition

    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

    ShortUnique id for inter-element referencing
    Control0..1
    Typestring
    Is Modifierfalse
    XML FormatIn the XML format, this property is represented as an attribute.
    Summaryfalse
    208. Contract.term.asset.context.extension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

    ShortAdditional content defined by implementations
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifierfalse
    Summaryfalse
    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    210. Contract.term.asset.context.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    212. Contract.term.asset.context.reference
    Definition

    Asset context reference may include the creator, custodian, or owning Person or Organization (e.g., bank, repository), location held, e.g., building, jurisdiction.

    ShortCreator,custodian or owner
    Control0..1
    TypeReference(Resource)
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    214. Contract.term.asset.context.code
    Definition

    Coded representation of the context generally or of the Referenced entity, such as the asset holder type or location.

    ShortCodeable asset context
    Control0..*
    BindingFor example codes, see ContractResourceAssetContextCodes
    (example to http://hl7.org/fhir/ValueSet/contract-assetcontext)

    Codes for the context of the asset.

    TypeCodeableConcept
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    216. Contract.term.asset.context.text
    Definition

    Context description.

    ShortContext description
    Control0..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    218. Contract.term.asset.condition
    Definition

    Description of the quality and completeness of the asset that imay be a factor in its valuation.

    ShortQuality desctiption of asset
    Control0..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    220. Contract.term.asset.periodType
    Definition

    Type of Asset availability for use or ownership.

    ShortAsset availability types
    Control0..*
    BindingFor example codes, see ContractResourceAssetAvailiabilityCodes
    (example to http://hl7.org/fhir/ValueSet/asset-availability)

    Codes for asset availability.

    TypeCodeableConcept
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    222. Contract.term.asset.period
    Definition

    Asset relevant contractual time period.

    ShortTime period of the asset
    Control0..*
    TypePeriod
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    224. Contract.term.asset.usePeriod
    Definition

    Time period of asset use.

    ShortTime period
    Control0..*
    TypePeriod
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    226. Contract.term.asset.text
    Definition

    Clause or question text (Prose Object) concerning the asset in a linked form, such as a QuestionnaireResponse used in the formation of the contract.

    ShortAsset clause or question text
    Control0..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    228. Contract.term.asset.linkId
    Definition

    Id [identifier??] of the clause or question text about the asset in the referenced form or QuestionnaireResponse.

    ShortPointer to asset text
    Control0..*
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    230. Contract.term.asset.answer
    Definition

    Response to assets.

    ShortResponse to assets
    Control0..*
    TypeSee ttp://hl7.org/fhir/StructureDefinition/Contract#Contract.term.offer.answer
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    232. Contract.term.asset.securityLabelNumber
    Definition

    Security labels that protects the asset.

    ShortAsset restriction numbers
    Control0..*
    TypeunsignedInt
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    234. Contract.term.asset.valuedItem
    Definition

    Contract Valued Item List.

    ShortContract Valued Item List
    Control0..*
    TypeBackboneElement
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    236. Contract.term.asset.valuedItem.id
    Definition

    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

    ShortUnique id for inter-element referencing
    Control0..1
    Typestring
    Is Modifierfalse
    XML FormatIn the XML format, this property is represented as an attribute.
    Summaryfalse
    238. Contract.term.asset.valuedItem.extension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

    ShortAdditional content defined by implementations
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifierfalse
    Summaryfalse
    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    240. Contract.term.asset.valuedItem.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    242. Contract.term.asset.valuedItem.entity[x]
    Definition

    Specific type of Contract Valued Item that may be priced.

    ShortContract Valued Item Type
    Control0..1
    TypeChoice of: CodeableConcept, Reference(Resource)
    [x] NoteSee Choice of Data Types for further information about how to use [x]
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    244. Contract.term.asset.valuedItem.identifier
    Definition

    Identifies a Contract Valued Item instance.

    ShortContract Valued Item Number
    NoteThis is a business identifier, not a resource identifier (see discussion)
    Control0..1
    TypeIdentifier
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    246. Contract.term.asset.valuedItem.effectiveTime
    Definition

    Indicates the time during which this Contract ValuedItem information is effective.

    ShortContract Valued Item Effective Tiem
    Control0..1
    TypedateTime
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    248. Contract.term.asset.valuedItem.quantity
    Definition

    Specifies the units by which the Contract Valued Item is measured or counted, and quantifies the countable or measurable Contract Valued Item instances.

    ShortCount of Contract Valued Items
    Control0..1
    TypeQuantity(SimpleQuantity)
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    250. Contract.term.asset.valuedItem.unitPrice
    Definition

    A Contract Valued Item unit valuation measure.

    ShortContract Valued Item fee, charge, or cost
    Control0..1
    TypeMoney
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    252. Contract.term.asset.valuedItem.factor
    Definition

    A real number that represents a multiplier used in determining the overall value of the Contract Valued Item delivered. The concept of a Factor allows for a discount or surcharge multiplier to be applied to a monetary amount.

    ShortContract Valued Item Price Scaling Factor
    Control0..1
    Typedecimal
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    254. Contract.term.asset.valuedItem.points
    Definition

    An amount that expresses the weighting (based on difficulty, cost and/or resource intensiveness) associated with the Contract Valued Item delivered. The concept of Points allows for assignment of point values for a Contract Valued Item, such that a monetary amount can be assigned to each point.

    ShortContract Valued Item Difficulty Scaling Factor
    Control0..1
    Typedecimal
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    256. Contract.term.asset.valuedItem.net
    Definition

    Expresses the product of the Contract Valued Item unitQuantity and the unitPriceAmt. For example, the formula: unit Quantity * unit Price (Cost per Point) * factor Number * points = net Amount. Quantity, factor and points are assumed to be 1 if not supplied.

    ShortTotal Contract Valued Item Value
    Control0..1
    TypeMoney
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    258. Contract.term.asset.valuedItem.payment
    Definition

    Terms of valuation.

    ShortTerms of valuation
    Control0..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    260. Contract.term.asset.valuedItem.paymentDate
    Definition

    When payment is due.

    ShortWhen payment is due
    Control0..1
    TypedateTime
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    262. Contract.term.asset.valuedItem.responsible
    Definition

    Who will make payment.

    ShortWho will make payment
    Control0..1
    TypeReference(Organization, Patient, Practitioner, PractitionerRole, RelatedPerson)
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    264. Contract.term.asset.valuedItem.recipient
    Definition

    Who will receive payment.

    ShortWho will receive payment
    Control0..1
    TypeReference(Organization, Patient, Practitioner, PractitionerRole, RelatedPerson)
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    266. Contract.term.asset.valuedItem.linkId
    Definition

    Id of the clause or question text related to the context of this valuedItem in the referenced form or QuestionnaireResponse.

    ShortPointer to specific item
    Control0..*
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    268. Contract.term.asset.valuedItem.securityLabelNumber
    Definition

    A set of security labels that define which terms are controlled by this condition.

    ShortSecurity Labels that define affected terms
    Control0..*
    TypeunsignedInt
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    270. Contract.term.action
    Definition

    An actor taking a role in an activity for which it can be assigned some degree of responsibility for the activity taking place.

    ShortEntity being ascribed responsibility
    Comments

    Several agents may be associated (i.e. has some responsibility for an activity) with an activity and vice-versa. For example, in cases of actions initiated by one user for other users, or in events that involve more than one user, hardware device, software, or system process. However, only one user may be the initiator/requestor for the event.

    Control0..*
    TypeBackboneElement
    Is Modifierfalse
    Summaryfalse
    Requirements

    An agent can be a person, an organization, software, device, or other entities that may be ascribed responsibility.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    272. Contract.term.action.id
    Definition

    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

    ShortUnique id for inter-element referencing
    Control0..1
    Typestring
    Is Modifierfalse
    XML FormatIn the XML format, this property is represented as an attribute.
    Summaryfalse
    274. Contract.term.action.extension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

    ShortAdditional content defined by implementations
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifierfalse
    Summaryfalse
    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    276. Contract.term.action.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    278. Contract.term.action.doNotPerform
    Definition

    True if the term prohibits the action.

    ShortTrue if the term prohibits the action
    Control0..1
    Typeboolean
    Is Modifiertrue because If true this element negates the specified action. For Example, instead of a dictate to perform an action, it is a dictate not to perform the action.
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    280. Contract.term.action.type
    Definition

    Activity or service obligation to be done or not done, performed or not performed, effectuated or not by this Contract term.

    ShortType or form of the action
    Control1..1
    BindingFor example codes, see ContractActionCodes
    (example to http://hl7.org/fhir/ValueSet/contract-action)

    Detailed codes for the contract action.

    TypeCodeableConcept
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    282. Contract.term.action.subject
    Definition

    Entity of the action.

    ShortEntity of the action
    Control0..*
    TypeBackboneElement
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    284. Contract.term.action.subject.id
    Definition

    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

    ShortUnique id for inter-element referencing
    Control0..1
    Typestring
    Is Modifierfalse
    XML FormatIn the XML format, this property is represented as an attribute.
    Summaryfalse
    286. Contract.term.action.subject.extension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

    ShortAdditional content defined by implementations
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifierfalse
    Summaryfalse
    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    288. Contract.term.action.subject.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    290. Contract.term.action.subject.reference
    Definition

    The entity the action is performed or not performed on or for.

    ShortEntity of the action
    Control1..*
    TypeReference(Patient, RelatedPerson, Practitioner, PractitionerRole, Device, Group, Organization)
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    292. Contract.term.action.subject.role
    Definition

    Role type of agent assigned roles in this Contract.

    ShortRole type of the agent
    Control0..1
    BindingFor example codes, see ContractActorRoleCodes
    (example to http://hl7.org/fhir/ValueSet/contract-actorrole)

    Detailed codes for the contract actor role.

    TypeCodeableConcept
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    294. Contract.term.action.intent
    Definition

    Reason or purpose for the action stipulated by this Contract Provision.

    ShortPurpose for the Contract Term Action
    Control1..1
    BindingFor example codes, see PurposeOfUse
    (example to http://terminology.hl7.org/ValueSet/v3-PurposeOfUse)

    Detailed codes for the contract action reason.

    TypeCodeableConcept
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    296. Contract.term.action.linkId
    Definition

    Id [identifier??] of the clause or question text related to this action in the referenced form or QuestionnaireResponse.

    ShortPointer to specific item
    Control0..*
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    298. Contract.term.action.status
    Definition

    Current state of the term action.

    ShortState of the action
    Control1..1
    BindingFor example codes, see ContractResourceActionStatusCodes
    (example to http://hl7.org/fhir/ValueSet/contract-actionstatus)

    Codes for the status of an term action.

    TypeCodeableConcept
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    300. Contract.term.action.context
    Definition

    Encounter or Episode with primary association to specified term activity.

    ShortEpisode associated with action
    Control0..1
    TypeReference(Encounter, EpisodeOfCare)
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    302. Contract.term.action.contextLinkId
    Definition

    Id [identifier??] of the clause or question text related to the requester of this action in the referenced form or QuestionnaireResponse.

    ShortPointer to specific item
    Control0..*
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    304. Contract.term.action.occurrence[x]
    Definition

    When action happens.

    ShortWhen action happens
    Control0..1
    TypeChoice of: dateTime, Period, Timing
    [x] NoteSee Choice of Data Types for further information about how to use [x]
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    306. Contract.term.action.requester
    Definition

    Who or what initiated the action and has responsibility for its activation.

    ShortWho asked for action
    Control0..*
    TypeReference(Patient, RelatedPerson, Practitioner, PractitionerRole, Device, Group, Organization)
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    308. Contract.term.action.requesterLinkId
    Definition

    Id [identifier??] of the clause or question text related to the requester of this action in the referenced form or QuestionnaireResponse.

    ShortPointer to specific item
    Control0..*
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    310. Contract.term.action.performerType
    Definition

    The type of individual that is desired or required to perform or not perform the action.

    ShortKind of service performer
    Control0..*
    BindingFor example codes, see ProvenanceParticipantType
    (example to http://hl7.org/fhir/ValueSet/provenance-agent-type)

    Codes for the types of action perfomer.

    TypeCodeableConcept
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    312. Contract.term.action.performerRole
    Definition

    The type of role or competency of an individual desired or required to perform or not perform the action.

    ShortCompetency of the performer
    Control0..1
    BindingFor example codes, see ProvenanceParticipantRole
    (example to http://hl7.org/fhir/ValueSet/provenance-agent-role)

    Codes for the role of the action performer.

    TypeCodeableConcept
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    314. Contract.term.action.performer
    Definition

    Indicates who or what is being asked to perform (or not perform) the ction.

    ShortActor that wil execute (or not) the action
    Control0..1
    TypeReference(RelatedPerson, Patient, Practitioner, PractitionerRole, CareTeam, Device, Substance, Organization, Location)
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    316. Contract.term.action.performerLinkId
    Definition

    Id [identifier??] of the clause or question text related to the reason type or reference of this action in the referenced form or QuestionnaireResponse.

    ShortPointer to specific item
    Control0..*
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    318. Contract.term.action.reasonCode
    Definition

    Rationale for the action to be performed or not performed. Describes why the action is permitted or prohibited.

    ShortWhy is action (not) needed?
    Control0..*
    BindingFor example codes, see PurposeOfUse
    (example to http://terminology.hl7.org/ValueSet/v3-PurposeOfUse)

    Detailed codes for the contract action reason.

    TypeCodeableConcept
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    320. Contract.term.action.reasonReference
    Definition

    Indicates another resource whose existence justifies permitting or not permitting this action.

    ShortWhy is action (not) needed?
    Control0..*
    TypeReference(Condition, Observation, DiagnosticReport, DocumentReference, Questionnaire, QuestionnaireResponse)
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    322. Contract.term.action.reason
    Definition

    Describes why the action is to be performed or not performed in textual form.

    ShortWhy action is to be performed
    Control0..*
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    324. Contract.term.action.reasonLinkId
    Definition

    Id [identifier??] of the clause or question text related to the reason type or reference of this action in the referenced form or QuestionnaireResponse.

    ShortPointer to specific item
    Control0..*
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    326. Contract.term.action.note
    Definition

    Comments made about the term action made by the requester, performer, subject or other participants.

    ShortComments about the action
    Control0..*
    TypeAnnotation
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    328. Contract.term.action.securityLabelNumber
    Definition

    Security labels that protects the action.

    ShortAction restriction numbers
    Control0..*
    TypeunsignedInt
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    330. Contract.term.group
    Definition

    Nested group of Contract Provisions.

    ShortNested Contract Term Group
    Control0..*
    TypeSee ttp://hl7.org/fhir/StructureDefinition/Contract#Contract.term
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    332. Contract.supportingInfo
    Definition

    Information that may be needed by/relevant to the performer in their execution of this term action.

    ShortExtra Information
    Control0..*
    TypeReference(Resource)
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    334. Contract.relevantHistory
    Definition

    Links to Provenance records for past versions of this Contract definition, derivative, or instance, which identify key state transitions or updates that are likely to be relevant to a user looking at the current version of the Contract. The Provence.entity indicates the target that was changed in the update. http://build.fhir.org/provenance-definitions.html#Provenance.entity.

    ShortKey event in Contract History
    Control0..*
    TypeReference(Provenance)
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    336. Contract.signer
    Definition

    Parties with legal standing in the Contract, including the principal parties, the grantor(s) and grantee(s), which are any person or organization bound by the contract, and any ancillary parties, which facilitate the execution of the contract such as a notary or witness.

    ShortContract Signatory
    Comments

    Signers who are principal parties to the contract are bound by the Contract.activity related to the Contract.topic, and the Contract.term(s), which either extend or restrict the overall action on the topic by, for example, stipulating specific policies or obligations constraining actions, action reason, or agents with respect to some or all of the topic. For example, specifying how policies or obligations shall constrain actions and action reasons permitted or denied on all or a subset of the Contract.topic (e.g., all or a portion of property being transferred by the contract), agents (e.g., who can resell, assign interests, or alter the property being transferred by the contract), actions, and action reasons; or with respect to Contract.terms, stipulating, extending, or limiting the Contract.period of applicability or valuation of items under consideration.

    Control0..*
    TypeBackboneElement
    Is Modifierfalse
    Summaryfalse
    Requirements

    The Contract.signer applies a signature to the Contract.binding referenced resource, which is the documentation that is the legal "source of truth". The Contract.signer may delegate, such as a legally recognized personal representative, or have a delegate assigned e.g., by a court of law, to actually sign the Contract, such as a trustee in the case of incompetence.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    338. Contract.signer.id
    Definition

    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

    ShortUnique id for inter-element referencing
    Control0..1
    Typestring
    Is Modifierfalse
    XML FormatIn the XML format, this property is represented as an attribute.
    Summaryfalse
    340. Contract.signer.extension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

    ShortAdditional content defined by implementations
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifierfalse
    Summaryfalse
    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    342. Contract.signer.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    344. Contract.signer.type
    Definition

    Role of this Contract signer, e.g. notary, grantee.

    ShortContract Signatory Role
    Control1..1
    BindingThe codes SHOULD be taken from ContractSignerTypeCodes
    (preferred to http://hl7.org/fhir/ValueSet/contract-signer-type)

    List of parties who may be signing.

    TypeCoding
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    346. Contract.signer.party
    Definition

    Party which is a signator to this Contract.

    ShortContract Signatory Party
    Control1..1
    TypeReference(Organization, Patient, Practitioner, PractitionerRole, RelatedPerson)
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    348. Contract.signer.signature
    Definition

    Legally binding Contract DSIG signature contents in Base64.

    ShortContract Documentation Signature
    Control1..*
    TypeSignature
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    350. Contract.friendly
    Definition

    The "patient friendly language" versionof the Contract in whole or in parts. "Patient friendly language" means the representation of the Contract and Contract Provisions in a manner that is readily accessible and understandable by a layperson in accordance with best practices for communication styles that ensure that those agreeing to or signing the Contract understand the roles, actions, obligations, responsibilities, and implication of the agreement.

    ShortContract Friendly Language
    Control0..*
    TypeBackboneElement
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    352. Contract.friendly.id
    Definition

    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

    ShortUnique id for inter-element referencing
    Control0..1
    Typestring
    Is Modifierfalse
    XML FormatIn the XML format, this property is represented as an attribute.
    Summaryfalse
    354. Contract.friendly.extension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

    ShortAdditional content defined by implementations
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifierfalse
    Summaryfalse
    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    356. Contract.friendly.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    358. Contract.friendly.content[x]
    Definition

    Human readable rendering of this Contract in a format and representation intended to enhance comprehension and ensure understandability.

    ShortEasily comprehended representation of this Contract
    Control1..1
    TypeChoice of: Attachment, Reference(Composition, DocumentReference, QuestionnaireResponse)
    [x] NoteSee Choice of Data Types for further information about how to use [x]
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    360. Contract.legal
    Definition

    List of Legal expressions or representations of this Contract.

    ShortContract Legal Language
    Control1..1
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    362. Contract.legal.id
    Definition

    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

    ShortUnique id for inter-element referencing
    Control0..1
    Typestring
    Is Modifierfalse
    XML FormatIn the XML format, this property is represented as an attribute.
    Summaryfalse
    364. Contract.legal.extension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

    ShortAdditional content defined by implementations
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifierfalse
    Summaryfalse
    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    366. Contract.legal.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    368. Contract.legal.content[x]
    Definition

    Contract legal text in human renderable form.

    ShortContract Legal Text
    Control1..1
    TypeAttachment
    [x] NoteSee Choice of Data Types for further information about how to use [x]
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    370. Contract.legal.content[x].id
    Definition

    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

    ShortUnique id for inter-element referencing
    Control0..1
    Typestring
    Is Modifierfalse
    XML FormatIn the XML format, this property is represented as an attribute.
    Summaryfalse
    372. Contract.legal.content[x].extension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

    ShortAdditional content defined by implementations
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifierfalse
    Summaryfalse
    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    SlicingThis element introduces a set of slices on Contract.legal.content[x].extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
    • value @ url
    • 374. Contract.legal.content[x].contentType
      Definition

      Identifies the type of the data in the attachment and allows a method to be chosen to interpret or render the data. Includes mime type parameters such as charset where appropriate.

      ShortMime type of the content, with charset etc.
      Control1..1
      BindingThe codes SHALL be taken from Mime Types
      (required to http://hl7.org/fhir/ValueSet/mimetypes|4.0.1)

      The mime type of an attachment. Any valid mime type is allowed.

      Typecode
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Requirements

      Processors of the data need to be able to know how to interpret the data.

      Fixed Valueapplication/xhtml+xml
      Example<br/><b>General</b>:text/plain; charset=UTF-8, image/png
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      376. Contract.legal.content[x].language
      Definition

      The human language of the content. The value can be any valid value according to BCP 47.

      ShortHuman language of the content (BCP-47)
      Control0..1
      BindingThe codes SHOULD be taken from CommonLanguages
      (preferred to http://hl7.org/fhir/ValueSet/languages)

      A human language.

      Additional BindingsPurpose
      AllLanguagesMax Binding
      Typecode
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Requirements

      Users need to be able to choose between the languages in a set of attachments.

      Example<br/><b>General</b>:en-AU
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      378. Contract.legal.content[x].data
      Definition

      The full and complete narrative form of information use statement including policy statements.

      ShortInformation use statement narrative
      Comments

      The base64-encoded data SHALL be expressed in the same character set as the base resource XML or JSON.

      Control1..1
      Typebase64Binary
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summaryfalse
      Requirements

      The data needs to able to be transmitted inline.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      380. Contract.legal.content[x].url
      Definition

      A location where the data can be accessed.

      ShortUri where the data can be found
      Comments

      If both data and url are provided, the url SHALL point to the same content as the data contains. Urls may be relative references or may reference transient locations such as a wrapping envelope using cid: though this has ramifications for using signatures. Relative URLs are interpreted relative to the service url, like a resource reference, rather than relative to the resource itself. If a URL is provided, it SHALL resolve to actual data.

      Control0..0
      Typeurl
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Requirements

      The data needs to be transmitted by reference.

      Example<br/><b>General</b>:http://www.acme.com/logo-small.png
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      382. Contract.legal.content[x].size
      Definition

      The number of bytes of data that make up this attachment (before base64 encoding, if that is done).

      ShortNumber of bytes of content (if url provided)
      Comments

      The number of bytes is redundant if the data is provided as a base64binary, but is useful if the data is provided as a url reference.

      Control0..1
      TypeunsignedInt
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Requirements

      Representing the size allows applications to determine whether they should fetch the content automatically in advance, or refuse to fetch it at all.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      384. Contract.legal.content[x].hash
      Definition

      The calculated hash of the data using SHA-1. Represented using base64.

      ShortHash of the data (sha-1, base64ed)
      Comments

      The hash is calculated on the data prior to base64 encoding, if the data is based64 encoded. The hash is not intended to support digital signatures. Where protection against malicious threats a digital signature should be considered, see Provenance.signature for mechanism to protect a resource with a digital signature.

      Control0..1
      Typebase64Binary
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Requirements

      Included so that applications can verify that the contents of a location have not changed due to technical failures (e.g., storage rot, transport glitch, incorrect version).

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      386. Contract.legal.content[x].title
      Definition

      A label or set of text to display in place of the data.

      ShortLabel to display in place of the data
      Control0..1
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Requirements

      Applications need a label to display to a human user in place of the actual data if the data cannot be rendered or perceived by the viewer.

      Example<br/><b>General</b>:Official Corporate Logo
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      388. Contract.legal.content[x].creation
      Definition

      The date that the attachment was first created.

      ShortDate attachment was first created
      Control0..1
      TypedateTime
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Requirements

      This is often tracked as an integrity issue for use of the attachment.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      390. Contract.rule
      Definition

      List of Computable Policy Rule Language Representations of this Contract.

      ShortComputable Contract Language
      Control0..*
      TypeBackboneElement
      Is Modifierfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      392. Contract.rule.id
      Definition

      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

      ShortUnique id for inter-element referencing
      Control0..1
      Typestring
      Is Modifierfalse
      XML FormatIn the XML format, this property is represented as an attribute.
      Summaryfalse
      394. Contract.rule.extension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortAdditional content defined by implementations
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifierfalse
      Summaryfalse
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      396. Contract.rule.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      398. Contract.rule.content[x]
      Definition

      Computable Contract conveyed using a policy rule language (e.g. XACML, DKAL, SecPal).

      ShortComputable Contract Rules
      Control1..1
      TypeChoice of: Attachment, Reference(DocumentReference)
      [x] NoteSee Choice of Data Types for further information about how to use [x]
      Is Modifierfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      400. Contract.legallyBinding[x]
      Definition

      Legally binding Contract: This is the signed and legally recognized representation of the Contract, which is considered the "source of truth" and which would be the basis for legal action related to enforcement of this Contract.

      ShortBinding Contract
      Control0..1
      TypeChoice of: Attachment, Reference(Composition, DocumentReference, QuestionnaireResponse, Contract)
      [x] NoteSee Choice of Data Types for further information about how to use [x]
      Is Modifierfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))