My Health Record FHIR IG - Local Development build (v1.4.0) built by the FHIR (HL7® FHIR® Standard) Build Tools. See the Directory of published versions

Resource Profile: MHRPractitionerRoleAuthoring - Detailed Descriptions

Active as of 2025-07-24

Definitions for the dh-practitionerrole-author-mhr-1 resource profile.

Guidance on how to interpret the contents of this table can be foundhere

0. PractitionerRole
Definition

A specific set of Roles/Locations/specialties/services that a practitioner may perform at an organization for a period of time.

ShortA practitioner acting as an author or observer in a healthcare role, on behalf of an organisationRoles/organizations the practitioner is associated with
Control0..*
Is Modifierfalse
Summaryfalse
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
inv-dh-prarol-01: If present, an organization shall at least have a reference, an identifier or a display (organization.exists() implies organization.all($this.reference.exists() or $this.identifier.exists() or $this.display.exists()))
inv-dh-prarol-02: If present, a location shall at least have a reference, an identifier or a display (location.exists() implies location.all($this.reference.exists() or $this.identifier.exists() or $this.display.exists()))
inv-dh-prarol-03: If present, a healthcare service shall at least have a reference, an identifier or a display (healthcareService.exists() implies healthcareService.all($this.reference.exists() or $this.identifier.exists() or $this.display.exists()))
2. PractitionerRole.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. PractitionerRole.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Summaryfalse
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
6. PractitionerRole.identifier
Definition

Business Identifiers that are specific to a role/location.

ShortBusiness Identifiers that are specific to a role/location
NoteThis is a business identifier, not a resource identifier (see discussion)
Control10..*
TypeIdentifier(Identifier, AU Medicare Provider Number, AU National Provider Identifier At Organisation, AU Employee Number)
Is Modifierfalse
Must Supporttrue
Must Support TypesNo must-support rules about the choice of types/profiles
Summarytrue
Requirements

Often, specific identities are assigned for the agent.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on PractitionerRole.identifier. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • pattern @ type
  • 8. PractitionerRole.identifier:medicareProvider
    Slice NamemedicareProvider
    Definition

    Business Identifiers that are specific to a role/location.

    ShortBusiness Identifiers that are specific to a role/location
    NoteThis is a business identifier, not a resource identifier (see discussion)
    Control0..1*
    TypeIdentifier(AU Medicare Provider Number)
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Requirements

    Often, specific identities are assigned for the agent.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    10. PractitionerRole.identifier:hpii
    Slice Namehpii
    Definition

    Business Identifiers that are specific to a role/location.

    ShortBusiness Identifiers that are specific to a role/location
    NoteThis is a business identifier, not a resource identifier (see discussion)
    Control0..1*
    TypeIdentifier(AU HPI-I)
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Requirements

    Often, specific identities are assigned for the agent.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    12. PractitionerRole.identifier:caei
    Slice Namecaei
    Definition

    Business Identifiers that are specific to a role/location.

    ShortBusiness Identifiers that are specific to a role/location
    NoteThis is a business identifier, not a resource identifier (see discussion)
    Control0..1*
    TypeIdentifier(AU Care Agency Employee Identifier)
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Requirements

    Often, specific identities are assigned for the agent.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    14. PractitionerRole.practitioner
    Definition

    Practitioner that is able to provide the defined services for the organization.

    ShortPractitioner that is able to provide the defined services for the organization
    Control10..1
    This element is affected by the following invariants: au-core-prarol-01
    TypeReference(AU Core Practitioner, Practitioner)
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    au-core-prarol-01: At least a reference, identifier or display shall be present, or, if neither is available, the Data Absent Reason extension shall be present ((reference.exists() or identifier.exists() or display.exists()) xor extension('http://hl7.org/fhir/StructureDefinition/data-absent-reason').exists())
    16. PractitionerRole.practitioner.reference
    Definition

    A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

    ShortLiteral reference, Relative, internal or absolute URL
    Comments

    Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

    Control10..1
    This element is affected by the following invariants: ref-1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    18. PractitionerRole.organization
    Definition

    The organization where the Practitioner performs the roles associated.

    ShortOrganization where the roles are available
    Control10..1
    This element is affected by the following invariants: inv-dh-prarol-01
    TypeReference(AU Core Organization, Organization)
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    20. PractitionerRole.organization.reference
    Definition

    A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

    ShortLiteral reference, Relative, internal or absolute URL
    Comments

    Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

    Control10..1
    This element is affected by the following invariants: ref-1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    22. PractitionerRole.code
    Definition

    Roles which this practitioner is authorized to perform for the organization.

    ShortRoles which this practitioner may perform
    Comments

    A person may have more than one role.

    Control0..*
    BindingThe codes SHOULD be taken from For example codes, see Practitioner Role .http://hl7.org/fhir/ValueSet/practitioner-role
    (preferred to https://healthterminologies.gov.au/fhir/ValueSet/practitioner-role-1)
    TypeCodeableConcept
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Requirements

    Need to know what authority the practitioner has - what can they do?

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    24. PractitionerRole.specialty
    Definition

    Specific specialty of the practitioner.

    ShortSpecific specialty of the practitioner
    Control0..*
    BindingThe codes SHOULD be taken from Clinical Specialty .http://hl7.org/fhir/ValueSet/c80-practice-codes
    (preferred to https://healthterminologies.gov.au/fhir/ValueSet/clinical-specialty-1)
    TypeCodeableConcept
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    26. PractitionerRole.location
    Definition

    The location(s) at which this practitioner provides care.

    ShortThe location(s) at which this practitioner provides care
    Control0..*
    This element is affected by the following invariants: inv-dh-prarol-02
    TypeReference(AU Core Location, Location)
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    28. PractitionerRole.healthcareService
    Definition

    The list of healthcare services that this worker provides for this role's Organization/Location(s).

    ShortThe list of healthcare services that this worker provides for this role's Organization/Location(s)
    Control0..1*
    This element is affected by the following invariants: inv-dh-prarol-03
    TypeReference(AU Core HealthcareService, HealthcareService)
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    30. PractitionerRole.telecom
    Definition

    Contact details that are specific to the role/location/service.

    ShortContact details that are specific to the role/location/service
    Control10..*
    TypeContactPoint
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Requirements

    Often practitioners have a dedicated line for each location (or service) that they work at, and need to be able to define separate contact details for each of these.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

    Guidance on how to interpret the contents of this table can be foundhere

    0. PractitionerRole
    ShortA practitioner acting as an author or observer in a healthcare role, on behalf of an organisation
    Invariantsinv-dh-prarol-01: If present, an organization shall at least have a reference, an identifier or a display (organization.exists() implies organization.all($this.reference.exists() or $this.identifier.exists() or $this.display.exists()))
    inv-dh-prarol-02: If present, a location shall at least have a reference, an identifier or a display (location.exists() implies location.all($this.reference.exists() or $this.identifier.exists() or $this.display.exists()))
    inv-dh-prarol-03: If present, a healthcare service shall at least have a reference, an identifier or a display (healthcareService.exists() implies healthcareService.all($this.reference.exists() or $this.identifier.exists() or $this.display.exists()))
    2. PractitionerRole.identifier
    Definition

    Business Identifiers that are specific to a role/location.

    NoteThis is a business identifier, not a resource identifier (see discussion)
    Control1..?
    Must Supporttrue
    SlicingThis element introduces a set of slices on PractitionerRole.identifier. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • pattern @ type
    • 4. PractitionerRole.identifier:hpii
      Slice Namehpii
      NoteThis is a business identifier, not a resource identifier (see discussion)
      Control0..1
      TypeIdentifier(AU HPI-I)
      Must Supporttrue
      6. PractitionerRole.identifier:caei
      Slice Namecaei
      NoteThis is a business identifier, not a resource identifier (see discussion)
      Control0..1
      TypeIdentifier(AU Care Agency Employee Identifier)
      Must Supporttrue
      8. PractitionerRole.practitioner
      10. PractitionerRole.practitioner.reference
      Control1..?
      12. PractitionerRole.organization
      Control1..?
      This element is affected by the following invariants: inv-dh-prarol-01
      14. PractitionerRole.organization.reference
      Control1..?
      16. PractitionerRole.location
      TypeReference(AU Core Location)
      Must Supporttrue
      18. PractitionerRole.healthcareService
      Control0..1
      This element is affected by the following invariants: inv-dh-prarol-03
      TypeReference(AU Core HealthcareService)
      Must Supporttrue
      20. PractitionerRole.telecom
      Control1..?

      Guidance on how to interpret the contents of this table can be foundhere

      0. PractitionerRole
      Definition

      A specific set of Roles/Locations/specialties/services that a practitioner may perform at an organization for a period of time.

      ShortA practitioner acting as an author or observer in a healthcare role, on behalf of an organisation
      Control0..*
      Is Modifierfalse
      Summaryfalse
      Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
      dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
      dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
      dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
      dom-6: A resource should have narrative for robust management (text.`div`.exists())
      inv-dh-prarol-01: If present, an organization shall at least have a reference, an identifier or a display (organization.exists() implies organization.all($this.reference.exists() or $this.identifier.exists() or $this.display.exists()))
      inv-dh-prarol-02: If present, a location shall at least have a reference, an identifier or a display (location.exists() implies location.all($this.reference.exists() or $this.identifier.exists() or $this.display.exists()))
      inv-dh-prarol-03: If present, a healthcare service shall at least have a reference, an identifier or a display (healthcareService.exists() implies healthcareService.all($this.reference.exists() or $this.identifier.exists() or $this.display.exists()))
      2. PractitionerRole.id
      Definition

      The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

      ShortLogical id of this artifact
      Comments

      The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

      Control0..1
      Typeid
      Is Modifierfalse
      Summarytrue
      4. PractitionerRole.meta
      Definition

      The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

      ShortMetadata about the resource
      Control0..1
      TypeMeta
      Is Modifierfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      6. PractitionerRole.implicitRules
      Definition

      A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

      ShortA set of rules under which this content was created
      Comments

      Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

      Control0..1
      Typeuri
      Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      8. PractitionerRole.language
      Definition

      The base language in which the resource is written.

      ShortLanguage of the resource content
      Comments

      Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

      Control0..1
      BindingThe codes SHOULD be taken from CommonLanguages
      (preferred to http://hl7.org/fhir/ValueSet/languages)

      A human language.

      Additional BindingsPurpose
      AllLanguagesMax Binding
      Typecode
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      10. PractitionerRole.text
      Definition

      A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

      ShortText summary of the resource, for human interpretation
      Comments

      Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

      Control0..1
      TypeNarrative
      Is Modifierfalse
      Summaryfalse
      Alternate Namesnarrative, html, xhtml, display
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      12. PractitionerRole.contained
      Definition

      These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

      ShortContained, inline Resources
      Comments

      This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

      Control0..*
      TypeResource
      Is Modifierfalse
      Summaryfalse
      Alternate Namesinline resources, anonymous resources, contained resources
      14. PractitionerRole.extension
      Definition

      May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortAdditional content defined by implementations
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifierfalse
      Summaryfalse
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      16. PractitionerRole.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
      Summaryfalse
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      18. PractitionerRole.identifier
      Definition

      Business Identifiers that are specific to a role/location.

      ShortBusiness Identifiers that are specific to a role/location
      NoteThis is a business identifier, not a resource identifier (see discussion)
      Control1..*
      TypeIdentifier(Identifier, AU Medicare Provider Number, AU National Provider Identifier At Organisation, AU Employee Number)
      Is Modifierfalse
      Must Supporttrue
      Must Support TypesNo must-support rules about the choice of types/profiles
      Summarytrue
      Requirements

      Often, specific identities are assigned for the agent.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      SlicingThis element introduces a set of slices on PractitionerRole.identifier. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • pattern @ type
      • 20. PractitionerRole.identifier:medicareProvider
        Slice NamemedicareProvider
        Definition

        Business Identifiers that are specific to a role/location.

        ShortBusiness Identifiers that are specific to a role/location
        NoteThis is a business identifier, not a resource identifier (see discussion)
        Control0..1
        TypeIdentifier(AU Medicare Provider Number)
        Is Modifierfalse
        Must Supporttrue
        Summarytrue
        Requirements

        Often, specific identities are assigned for the agent.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        22. PractitionerRole.identifier:hpii
        Slice Namehpii
        Definition

        Business Identifiers that are specific to a role/location.

        ShortBusiness Identifiers that are specific to a role/location
        NoteThis is a business identifier, not a resource identifier (see discussion)
        Control0..1
        TypeIdentifier(AU HPI-I)
        Is Modifierfalse
        Must Supporttrue
        Summarytrue
        Requirements

        Often, specific identities are assigned for the agent.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        24. PractitionerRole.identifier:caei
        Slice Namecaei
        Definition

        Business Identifiers that are specific to a role/location.

        ShortBusiness Identifiers that are specific to a role/location
        NoteThis is a business identifier, not a resource identifier (see discussion)
        Control0..1
        TypeIdentifier(AU Care Agency Employee Identifier)
        Is Modifierfalse
        Must Supporttrue
        Summarytrue
        Requirements

        Often, specific identities are assigned for the agent.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        26. PractitionerRole.active
        Definition

        Whether this practitioner role record is in active use.

        ShortWhether this practitioner role record is in active use
        Comments

        If this value is false, you may refer to the period to see when the role was in active use. If there is no period specified, no inference can be made about when it was active.

        Control0..1
        Typeboolean
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        Need to be able to mark a practitioner role record as not to be used because it was created in error, or otherwise no longer in active use.

        Meaning if MissingThis resource is generally assumed to be active if no value is provided for the active element
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        28. PractitionerRole.period
        Definition

        The period during which the person is authorized to act as a practitioner in these role(s) for the organization.

        ShortThe period during which the practitioner is authorized to perform in these role(s)
        Control0..1
        TypePeriod
        Is Modifierfalse
        Summarytrue
        Requirements

        Even after the agencies is revoked, the fact that it existed must still be recorded.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        30. PractitionerRole.practitioner
        Definition

        Practitioner that is able to provide the defined services for the organization.

        ShortPractitioner that is able to provide the defined services for the organization
        Control1..1
        This element is affected by the following invariants: au-core-prarol-01
        TypeReference(AU Core Practitioner)
        Is Modifierfalse
        Must Supporttrue
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        au-core-prarol-01: At least a reference, identifier or display shall be present, or, if neither is available, the Data Absent Reason extension shall be present ((reference.exists() or identifier.exists() or display.exists()) xor extension('http://hl7.org/fhir/StructureDefinition/data-absent-reason').exists())
        32. PractitionerRole.practitioner.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        34. PractitionerRole.practitioner.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        SlicingThis element introduces a set of slices on PractitionerRole.practitioner.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ url
        • 36. PractitionerRole.practitioner.reference
          Definition

          A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

          ShortLiteral reference, Relative, internal or absolute URL
          Comments

          Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

          Control1..1
          This element is affected by the following invariants: ref-1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          38. PractitionerRole.practitioner.type
          Definition

          The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

          The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

          ShortType the reference refers to (e.g. "Patient")
          Comments

          This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.

          Control0..1
          BindingUnless not suitable, these codes SHALL be taken from ResourceType
          (extensible to http://hl7.org/fhir/ValueSet/resource-types)

          Aa resource (or, for logical models, the URI of the logical model).

          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          40. PractitionerRole.practitioner.identifier
          Definition

          An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

          ShortLogical reference, when literal reference is not known
          Comments

          When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

          When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

          Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

          Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

          NoteThis is a business identifier, not a resource identifier (see discussion)
          Control0..1
          TypeIdentifier
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          42. PractitionerRole.practitioner.display
          Definition

          Plain text narrative that identifies the resource in addition to the resource reference.

          ShortText alternative for the resource
          Comments

          This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          44. PractitionerRole.organization
          Definition

          The organization where the Practitioner performs the roles associated.

          ShortOrganization where the roles are available
          Control1..1
          This element is affected by the following invariants: inv-dh-prarol-01
          TypeReference(AU Core Organization)
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          46. PractitionerRole.organization.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          48. PractitionerRole.organization.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          SlicingThis element introduces a set of slices on PractitionerRole.organization.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • value @ url
          • 50. PractitionerRole.organization.reference
            Definition

            A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

            ShortLiteral reference, Relative, internal or absolute URL
            Comments

            Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

            Control1..1
            This element is affected by the following invariants: ref-1
            Typestring
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            52. PractitionerRole.organization.type
            Definition

            The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

            The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

            ShortType the reference refers to (e.g. "Patient")
            Comments

            This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.

            Control0..1
            BindingUnless not suitable, these codes SHALL be taken from ResourceType
            (extensible to http://hl7.org/fhir/ValueSet/resource-types)

            Aa resource (or, for logical models, the URI of the logical model).

            Typeuri
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            54. PractitionerRole.organization.identifier
            Definition

            An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

            ShortLogical reference, when literal reference is not known
            Comments

            When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

            When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

            Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

            Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

            NoteThis is a business identifier, not a resource identifier (see discussion)
            Control0..1
            TypeIdentifier
            Is Modifierfalse
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            56. PractitionerRole.organization.display
            Definition

            Plain text narrative that identifies the resource in addition to the resource reference.

            ShortText alternative for the resource
            Comments

            This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

            Control0..1
            Typestring
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            58. PractitionerRole.code
            Definition

            Roles which this practitioner is authorized to perform for the organization.

            ShortRoles which this practitioner may perform
            Comments

            A person may have more than one role.

            Control0..*
            BindingThe codes SHOULD be taken from Practitioner Role .
            (preferred to https://healthterminologies.gov.au/fhir/ValueSet/practitioner-role-1)
            TypeCodeableConcept
            Is Modifierfalse
            Must Supporttrue
            Summarytrue
            Requirements

            Need to know what authority the practitioner has - what can they do?

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            60. PractitionerRole.specialty
            Definition

            Specific specialty of the practitioner.

            ShortSpecific specialty of the practitioner
            Control0..*
            BindingThe codes SHOULD be taken from Clinical Specialty .
            (preferred to https://healthterminologies.gov.au/fhir/ValueSet/clinical-specialty-1)
            TypeCodeableConcept
            Is Modifierfalse
            Must Supporttrue
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            62. PractitionerRole.location
            Definition

            The location(s) at which this practitioner provides care.

            ShortThe location(s) at which this practitioner provides care
            Control0..*
            This element is affected by the following invariants: inv-dh-prarol-02
            TypeReference(AU Core Location)
            Is Modifierfalse
            Must Supporttrue
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            64. PractitionerRole.healthcareService
            Definition

            The list of healthcare services that this worker provides for this role's Organization/Location(s).

            ShortThe list of healthcare services that this worker provides for this role's Organization/Location(s)
            Control0..1
            This element is affected by the following invariants: inv-dh-prarol-03
            TypeReference(AU Core HealthcareService)
            Is Modifierfalse
            Must Supporttrue
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            66. PractitionerRole.telecom
            Definition

            Contact details that are specific to the role/location/service.

            ShortContact details that are specific to the role/location/service
            Control1..*
            TypeContactPoint
            Is Modifierfalse
            Must Supporttrue
            Summarytrue
            Requirements

            Often practitioners have a dedicated line for each location (or service) that they work at, and need to be able to define separate contact details for each of these.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            68. PractitionerRole.availableTime
            Definition

            A collection of times the practitioner is available or performing this role at the location and/or healthcareservice.

            ShortTimes the Service Site is available
            Comments

            More detailed availability information may be provided in associated Schedule/Slot resources.

            Control0..*
            TypeBackboneElement
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            70. PractitionerRole.availableTime.id
            Definition

            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

            ShortUnique id for inter-element referencing
            Control0..1
            Typestring
            Is Modifierfalse
            XML FormatIn the XML format, this property is represented as an attribute.
            Summaryfalse
            72. PractitionerRole.availableTime.extension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

            ShortAdditional content defined by implementations
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Alternate Namesextensions, user content
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            74. PractitionerRole.availableTime.modifierExtension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

            ShortExtensions that cannot be ignored even if unrecognized
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
            Summarytrue
            Requirements

            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

            Alternate Namesextensions, user content, modifiers
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            76. PractitionerRole.availableTime.daysOfWeek
            Definition

            Indicates which days of the week are available between the start and end Times.

            Shortmon | tue | wed | thu | fri | sat | sun
            Control0..*
            BindingThe codes SHALL be taken from DaysOfWeek
            (required to http://hl7.org/fhir/ValueSet/days-of-week|4.0.1)

            The days of the week.

            Typecode
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            78. PractitionerRole.availableTime.allDay
            Definition

            Is this always available? (hence times are irrelevant) e.g. 24 hour service.

            ShortAlways available? e.g. 24 hour service
            Control0..1
            Typeboolean
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            80. PractitionerRole.availableTime.availableStartTime
            Definition

            The opening time of day. Note: If the AllDay flag is set, then this time is ignored.

            ShortOpening time of day (ignored if allDay = true)
            Comments

            The timezone is expected to be for where this HealthcareService is provided at.

            Control0..1
            Typetime
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            82. PractitionerRole.availableTime.availableStartTime.id
            Definition

            unique id for the element within a resource (for internal references)

            Shortxml:id (or equivalent in JSON)
            Control0..1
            Typestring
            Is Modifierfalse
            XML FormatIn the XML format, this property is represented as an attribute.
            Summaryfalse
            84. PractitionerRole.availableTime.availableStartTime.extension
            Definition

            An Extension

            ShortExtension
            Control0..*
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            SlicingThis element introduces a set of slices on PractitionerRole.availableTime.availableStartTime.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
            • value @ url
            • 86. PractitionerRole.availableTime.availableStartTime.extension:timeZone
              Slice NametimeZone
              Definition

              Australian time zone.

              ShortAU time zone
              Control0..1
              This element is affected by the following invariants: ele-1
              TypeExtension(Australian Time Zone) (Extension Type: CodeableConcept)
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              88. PractitionerRole.availableTime.availableStartTime.value
              Definition

              The actual value

              ShortPrimitive value for time
              Control0..1
              Typetime
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              90. PractitionerRole.availableTime.availableEndTime
              Definition

              The closing time of day. Note: If the AllDay flag is set, then this time is ignored.

              ShortClosing time of day (ignored if allDay = true)
              Comments

              The timezone is expected to be for where this HealthcareService is provided at.

              Control0..1
              Typetime
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              92. PractitionerRole.availableTime.availableEndTime.id
              Definition

              unique id for the element within a resource (for internal references)

              Shortxml:id (or equivalent in JSON)
              Control0..1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              94. PractitionerRole.availableTime.availableEndTime.extension
              Definition

              An Extension

              ShortExtension
              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              SlicingThis element introduces a set of slices on PractitionerRole.availableTime.availableEndTime.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
              • value @ url
              • 96. PractitionerRole.availableTime.availableEndTime.extension:timeZone
                Slice NametimeZone
                Definition

                Australian time zone.

                ShortAU time zone
                Control0..1
                This element is affected by the following invariants: ele-1
                TypeExtension(Australian Time Zone) (Extension Type: CodeableConcept)
                Is Modifierfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                98. PractitionerRole.availableTime.availableEndTime.value
                Definition

                The actual value

                ShortPrimitive value for time
                Control0..1
                Typetime
                Is Modifierfalse
                XML FormatIn the XML format, this property is represented as an attribute.
                Summaryfalse
                100. PractitionerRole.notAvailable
                Definition

                The practitioner is not available or performing this role during this period of time due to the provided reason.

                ShortNot available during this time due to provided reason
                Control0..*
                TypeBackboneElement
                Is Modifierfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                102. PractitionerRole.notAvailable.id
                Definition

                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                ShortUnique id for inter-element referencing
                Control0..1
                Typestring
                Is Modifierfalse
                XML FormatIn the XML format, this property is represented as an attribute.
                Summaryfalse
                104. PractitionerRole.notAvailable.extension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                ShortAdditional content defined by implementations
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifierfalse
                Summaryfalse
                Alternate Namesextensions, user content
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                106. PractitionerRole.notAvailable.modifierExtension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                ShortExtensions that cannot be ignored even if unrecognized
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                Summarytrue
                Requirements

                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                Alternate Namesextensions, user content, modifiers
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                108. PractitionerRole.notAvailable.description
                Definition

                The reason that can be presented to the user as to why this time is not available.

                ShortReason presented to the user explaining why time not available
                Control1..1
                Typestring
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                110. PractitionerRole.notAvailable.during
                Definition

                Service is not available (seasonally or for a public holiday) from this date.

                ShortService not available from this date
                Control0..1
                TypePeriod
                Is Modifierfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                112. PractitionerRole.availabilityExceptions
                Definition

                A description of site availability exceptions, e.g. public holiday availability. Succinctly describing all possible exceptions to normal site availability as details in the available Times and not available Times.

                ShortDescription of availability exceptions
                Control0..1
                Typestring
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                114. PractitionerRole.endpoint
                Definition

                Technical endpoints providing access to services operated for the practitioner with this role.

                ShortTechnical endpoints providing access to services operated for the practitioner with this role
                Control0..*
                TypeReference(Endpoint)
                Is Modifierfalse
                Summaryfalse
                Requirements

                Organizations have multiple systems that provide various services and ,ay also be different for practitioners too.

                So the endpoint satisfies the need to be able to define the technical connection details for how to connect to them, and for what purpose.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))